Acer Aspire XC600 - Boot Options Menu

Aspire XC600 Service Guide 21
Boot Options menu
Field Description Value
Launch CSM Controls the launching the Compatibility Support Module function
when booting.
Never
Always
Boot Priority Order
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Displays the device assigned to the specified boot sequence. The Setup Utility
attempts to boot the operating system in this order. By default, the computer
searches for boot devices in the following order:
• Hard disk
• Optical drive (CD/DVD)
• Removable device
• Network boot (LAN)
Hard Disk Drive Priority Press Enter to set the boot priority for the hard drive.
Optical Disc Drive
Priority
Press Enter to set the boot priority for the optical drive.
Removable Device
Priority
Press Enter to set the boot priority for a removable USB drive.
Network Device Priority Press Enter to set the boot priority for a network boot.
Quiet Boot When enabled, BIOS will show a full screen logo when booting; if
disabled, BIOS will show the diagnostic POST screen when
booting.
Enabled
Disabled
Fast Boot Enable or disable the fast boot function. Enabled
Disabled
Halt On Determines whether the system will stop for an error during the
POST. Options include:
• All, but Keyboard – If a keyboard error is detected, BIOS will
pause the system.
• All Errors –- Any error detected will pause the system.
• No Errors – BIOS will ignore any errors detected during POST
All, But
Keyboard
All Errors
No Errors