Acer Aspire XC600 - Security Menu

Aspire XC600 Service Guide 19
Security menu
Field Description Value
Supervisor Password Displays the supervisor password status. When set to
Installed, this password will allow the user to access and
change all settings in the Setup Utility.
Installed
Not Installed
User Password Displays the user password status. Only the following menus
will be accessible when this password is used to logged in:
• System Date and System Time
• Exit Without Saving
The F9 key (Load Default Settings) will also be unavailable.
Change Supervisor
Password
Press Enter to change the supervisor password.
Change User Password Press Enter to change the user password. Note that this field:
• is only accessible when a supervisor password is set;
• is cleared when the supervisor password is cleared.