76 Aspire XC600 Service Guide
BIOS Update
Updating the BIOS in DOS Mode
1. Press the power button to turn on the computer and boot to DOS mode.
2. Key in '
cd dostool'. (Go to BIOS path like "A:\DOSTOOL")
3. Key in 'fla
sh2M.bat' or 'flash2M'.
4. Press Enter
to flash the system BIOS.
5. Reb
oot the computer.
6. Press De
lete to run the CMOS Setup Utility.
7. Press F9 to load the system default settings.
8. Selec
t Ok, then press Enter.
9. Press F9
to save the default settings and close the Setup utility.
10. Select Ok, then press Enter.
To Next Page
Loading...
