Acer Aspire XC600 - Power Menu

Aspire XC600 Service Guide 17
Power menu
Field Description Value
ACPI Suspend Mode Use this item to define how your system suspends. Default
value is S3 (STR), the suspend mode is suspend to RAM,
i.e., the system shuts down with the exception of a refresh
current to the system memory.
S3 (STR)
Deep Power Off Mode Enables or disables compliance to the Energy-using
Products Lot 6 Directives (EuP Lot 6).
Enabled
Disabled
Power On by RTC Alarm Enables or disables the system to wake up from a power-
saving mode when an RTC alarm occurs.
Enabled
Disabled
Power On by PCIE
Devices
Enables or disables the system to wake up from a power-
saving mode when an installed PCIe LAN card received an
incoming call.
Enabled
Disabled
Power On by Onboard
LAN
Enables or disables the system to wake up from a power-
saving mode when an onboard LAN card received an
incoming call.
Enabled
Disabled
Wake Up by PS/2 KB/Mouse
Enables or disables the system to wake up from a power-
saving mode when a PS/2 keyboard or mouse is used.
Enabled
Disabled
Wake Up by USB KB/Mouse
Enables or disables the system to wake up from a power-
saving mode when a USB keyboard or mouse is used.
Enabled
Disabled
Restore On AC Power
Loss
Select the power state when an AC power loss occurs.
• Last State - The computer reverts to the last power state
before the power loss occurred.
• Off - The computer remains off until the power button is
pressed.
• On - The computer switches back on after the AC power
loss.
Last State
Off
On