46 Aspire Z3760 / Z3761 / Z5760 / Z5761 AIO Computer Service Guide
7. Remove the screws securing the graphics card riser board, then remove the riser board from the bracket.
Removing the System Fan
1. Remove the wall mount plate by following the procedure described on page 43.
2. Remove the graphics card assembly by following the procedures described on page 44.
3. Cut the cable tie securing the system cables.
Make sure you have a replacement cable tie for when you reassemble the machine back.
Quantity Color Torque Part Number
2 Chrome 4.5 ± 0.3 kgf-cm 86.00B75.240
A circuit board that is >10 cm
2
has been highlighted with a yellow rectangle as shown in the
above image. Follow local regulations for disposing this type of circuit board.
To Next Page
Loading...
