Acer CB342CU - User controls; Power Switch;Power LED; Using the Shortcut Menu

12
User controls
Power Switch/Power LED:
To turn the monitor ON or OFF.
Lights up to indicate the power is turned ON.
1
2
3
4
5
Using the Shortcut Menu
Press the function button to open the shortcut menu. The shortcut menu lets you quickly
select the most commonly accessed settings.
1 Power button Turns the monitor on/off.
2
/ /
OSD functions/
Down/Right
a. Press to view the OSD.
b. Press this button to select the desired item
when in OSD menu.
3
/ /
Input source
switching/Up/Left
a. Use the INPUT hotkey to enter Input select
function.
b. Press this button to select the desired item
when in OSD menu.
4
Volume Key Press this button to adjust volume.
Enter
a. Press to enter a selection in the OSD.
b. When OSD Lock push 3 seconds Lock function
is disabled
5
Empowering Key Press this button to select scenario mode.
Exit
When the OSD menu is active, this button will act
as the exit key (exit OSD menu).
FreeSync:
It can allow a FreeSync supported graphics source to dynamically adjust display refresh
rate based on typical content frame rates for power efficient, virtually stutter free and
low-latency display update.
KVM switch:
The built-in KVM switch allows you to control up to 2 computers from a single set of
keyboard and mouse connected to the monitor.