9
Turning the projector off
1 To turn the projector off, press and hold the power button. This message
appears: "Press again to Standby mode." Press the power button again.
2 The LED power indicator will flash orange after the projector is turned off,
and the fan(s) will continue to operate to ensure that the system cools
properly.
3 Once the system has finished cooling, the LED power indicator will stop
blinking and turn solid orange to indicate standby mode.
4 It is now safe to unplug the power cord.
Note: Whenever the projector automatically shuts down and the
LED lamp indicator turns solid red, contact your local reseller or
service center.
Note: Functions vary depending on model definition.
To Next Page
Loading...
