19
User Controls
Onscreen Display (OSD) Menus
The projector has multilingual OSD that allow you to make image adjustments and change
a variety of settings.
Using the OSD menus
• To open the OSD menu, press "MENU" on the remote control.
• When the OSD is displayed, use the keys to select any item in the
main menu. After selecting the desired main menu item, press to enter
submenu for feature setting.
• Use the keys to select the desired item and adjust the settings by
using the keys.
• Select the next item to be adjusted in the submenu and adjust as described
above.
• Press "BACK" on the remote control, the screen will go back to the
previous menu or exit OSD.
• Press "MENU" on the remote control to exit OSD directly. The OSD menu
will close and the projector will automatically save the new settings.
Note: Some of the following OSD settings may not be available. Please
refer to the actual OSD of your projector.
Note: Functions vary depending on model definition.
To Next Page
Loading...
