Acer G205H - Page 21

- 21 -
5
Tear down the two tape
behind the FFC and fix
the FFC of C/B to panel
The FFC must be
affixed besides the
under edge of the
panel
6
Assemble the SPK to the
main-SHD, the correct
position reference on the
picture, then the lock 4
screws to fasten it.
Screw-driver
7
Assemble the LVDS to the
I/F, the correct position
reference on the picture
Without the gap within
NOTE: Circuit boards >10 cm² has been highlighted with the yellow rectangle as
above image shows. Please detach the Circuit boards and follow local regulations for
disposal.
8
Assemble the PCBA to
Main-SHD