Acer G205H

- 23 -
15
Assemble the L-SHD the
correct position reference
on the picture. Insert the
FFC cable of control
board into the connector
of I/F board
16
Insect the inverter wire
one by one .
Keep all wires in.
17
Stick two acetic tapes to
fix the wire one by one as
the picture .
The wires must not
over the edge of the
Panel
18
Insect the speaker wire
to the right position
of the power board.
Then stick a acetic
tape to fixing the wire
as the picture.
Make sure the wire
between the mark on
the main-SHD and the
surface of the main-
SHD.