Acer G205H

- 20 -
4.2. Disassembly /Assembly
Assembly SOP about G205H
Preparation before assemble
1.Clean the room for work
2.Identify the area for material
3.Prepare the implement, equipments, materials as bellow:
1) Press-fixture
2) working table
3) Screw-driver
4) knife*1
5) glove
6) cleaning cloth
7) ESD protection
ite
m
picture
Operation
Tool
Notes
1
Stick the big Al tape to
panel which can protect
the Light-wire.
The tape must cover
the connect of the
wire
2
Check and put CLM-F on
the cushion carefully,
3
Assemble the panel on
CLM-F.
4
Assembly the Ctrl board
to CLM-F.