USB Support - Installation (All Platforms)
This release includes support for a USB communications interface to DDP2000-based
projectors. The setup program includes the files needed to install USB support (for
Windows 98/Me/2000/XP only ---Win95 and WinNT are not supported). After DLP
Composer™ Lite is installed, to install the USB support, choose the "Install DDP2000 USB
Driver" icon under "DLP Composer™ Lite" in your Start men u.
Follow the instruction on the screen to press any key and wait for the installation done.
And copy the file “F lashDeviceParameters.txt” into the C: \ Program Files\ DLP Composer
Lite X.X
Operating procedure
1. Connect the Projector and PC via USB cable.
2. Double-click [DLP Composer (TM) Lite]. The following screen will appear.
To Next Page
Loading...
