18 - Use with a Windows phone
USE WITH A WINDOWS PHONE
Install Acer Leap Manager
Download the app
Open Store and search for Acer Leap Manager. Download and install
the app.
Set up the app
Once you have installed the app, you will need to create an account to
complete setup. You can either log in with an existing username and
password, or create a new account.
The Leap device requires a smartphone that supports Bluetooth 4.0 and
Windows 8 or higher. Check that your phone meets these requirements
before downloading and installing the app.
Acer does not guarantee that the Leap device will work correctly with devices
that have not been tested by Acer. A list of tested devices is available on the
Acer website, which can be viewed by scanning the QR code on the Leap
device box.
Unlike most Bluetooth accessories, like headsets, your Leap device must be
paired directly through the app, not through your device’s Bluetooth Settings.
To Next Page
Loading...