Acer P1163 Series - Image Settings; Projection Modes; Keystone Correction

20
English
Image
Projection (for X1163/X113 series only)
• Front-Desktop: The factory default setting.
• Rear-Desktop: When you select this function, the projector
reverses the image so you can project from behind a translucent
screen.
• Rear-Ceiling: When you select this function, the projector reverses
and inverts the image at same time. You can project from behind
a translucent screen with ceiling mounted projection.
• Front-Ceiling: When you select this function, the projector inverts
the image for ceiling-mounted projection.
Keystone Adjust image distortion caused by tilting projection. (±40 degrees)(for
X1163/X113 series only)
Projection mode (for X1263/P1163 series only)
• Front: The factory default setting.
• Rear: Reverses the image so you can project from behind a
translucent screen.
Projection Location (for X1263/P1163 series only)
• Auto: Automatically adjusts projection location of image.
• Desktop
• Ceiling: Turns the image upside down for ceiling-mounted
projection.
Auto Keystone Automatically adjusts vertical image. (for X1263/P1163 series only)