Acer P205H

Acer Acer –LCD-P205H
7
x y
Cool
9300K 0.283 ± 0.030 0.297 ± 0.030
Warm
6500K 0.313 ± 0.030 0.329 ± 0.030
User
Panel While x Panel While y
3.4 Brightness uniformity
The test standard conditions refer to Sec 3.4.
(4)
Note (4): 25% is for Samsung panel LTM200KT01 (first source).The second source spec follow Sec 5.1.
3.5 Audio Signal(option)
Items Specification
Input impedance
≧ 10K ohm
Frequency response range
200Hz –20kHz
Signal to noise ratio
≧ 40 dB
Output power
≦1.5 W + 1.5 W(±20% tolerance), THD 10%.
Loading impedance
4 ohm
4. Input / Output Signal Specifications
4.1 Video signals
Analog
RGB signal: 0.7Vp-p (Input impedance = 75 Ohm)
Sync: TTL level (Input impedance ≧ 1k Ohm)
Positive and negative sync of Separate Horizontal/Vertical Sync
Digital : TMDS Signal: (min) ±200mVpp@24Bit
4.2 Signal Timing
Through D-SUB/DVI/HDMI connectors, this unit can support F
H
= 31~84 KHz, Fv=56~75Hz, with maximum pixel clock
160MHz input signal and WXGA+ output. Modes details as below:
VESA MODES