What to do if Acer Projector stops responding?
If your Acer Projector stops responding, turn it off if possible, then unplug the power cord. Wait at least 30 seconds before reconnecting the power.
Why is Acer Projector image stretched with widescreen DVD?
When playing a DVD encoded in anamorphic or 16:9 aspect ratio, you may need to adjust the following settings: If you play a 4:3 format DVD title, change the format to 4:3 in the Acer Projector OSD. If the image remains stretched, adjust the aspect ratio by setting up the display format to 16:9 (wide) aspect ratio on your DVD player.
How to adjust image size on Acer P5271 Projector?
To adjust the image size, try the following: Adjust the zoom ring on the top of the Acer Projector. You can also move the projector closer to or further from the screen. Alternatively, press "MENU" on the remote control or on the control panel, navigate to "Image --> Aspect Ratio," and experiment with different settings.
How to stop Acer P5271 image from flickering?
Adjust the "Tracking" to correct the unstable or flickering image. Refer to the "Image" section for more information. You can also try changing the display color depth settings on your computer.
How to correct slanted image sides on Acer P5271 Projector?
If possible, reposition the Acer Projector so that it is centered on the screen. Alternatively, press the "Keystone / " button on the OSD or the remote control until the sides are vertical.
What to do if Acer P5271 Projector image is partial on notebook?
First, press "RESYNC" on the remote control or control panel. If the image is incorrectly displayed, adjust your computer's resolution following the steps outlined for PC. Then, press the toggle output settings. Examples: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5 ]. If you still experience difficulty changing resolutions or your monitor freezes, restart all equipment, including the Acer Projector.
Why is Acer Projector image partial or scrolling on PC?
First, press "RESYNC" on the remote control or control panel. If the image is still incorrectly displayed, open "My Computer," then the "Control Panel," and double-click the "Display" icon. Select the "Settings" tab and ensure your display resolution setting is lower than or equal to UXGA (1600 x 1200). Click the "Advanced Properties" button. If the issue persists, change the monitor display you are using and verify that the resolution setting is lower than or equal to UXGA (1600 x 1200). Click the "Change" button under the "Monitor" tab, then "Show all devices". Next, select "Standard monitor types" under the SP box, and choose the resolution mode you need under the "Models" box. Verify that the resolution setting of the monitor display is lower than or equal to UXGA (1600 x 1200).
Why is my Acer P5271 image out of focus?
First, make sure the lens cap is removed. Then, adjust the focus ring on the projector lens. Also, ensure the projection screen is within the required distance: 4.9 to 32.4 feet (1.5 to 9.9 meters) for models P5271/P5271i/P5271n/P5290/P5281, or 4.9 to 27.6 feet (1.5 to 8.4 meters) for model P5390W. For more details, consult the "How to Get a Preferred Image Size by Adjusting Distance and Zoom" section.
How to fix no image on Acer P5271?
First, ensure all connections are correctly set up as described in the "Getting Started" section, and that none of the connector pins are bent or broken. Next, check that the projector lamp is securely installed; refer to the "Replacing the Lamp" section for guidance. Finally, confirm that you've removed the lens cap and that the Acer Projector is switched on.
Why is my Acer P5271 not displaying my notebook screen?
If the screen of your notebook computer is not displaying your presentation through the Acer Projector, and you are using a Microsoft® Windows® based notebook, your notebook PC may deactivate its own screen when a second display device is in use. Refer to your computer's manual for detailed information on how to reactivate it. If you are using an Apple® Mac® OS based notebook, open Display in System Preferences and select Video Mirroring "On".
General| Native Resolution | XGA (1024 x 768) |
|---|---|
| Display Technology | DLP |
| Brightness | 4000 lumens |
| Aspect Ratio | 4:3 |
| Projection Lens | f = 21.8 mm ~ 24 mm |
| Zoom Ratio | 1.1x |
| Throw Ratio | 1.95 ~ 2.15 (50"@2m) |
| Keystone Correction | +/-40 Degrees (Vertical) |
| Output Interface | VGA |
| Projection Size | 30" to 300" |
| Lamp Life | 5000 hours (Eco) |
To Next Page
