Acer PD525 Series - Page 27

25
... English
User Controls
H. Position (Horizontal Position)

Press the to move the image left.

Press the to move the image right.
V. Position (Vertical Position)

Press the to move the image down.

Press the to move the image up.
Frequency
“Frequency” changes the display data frequency to match the
frequency of your computer’s graphic card. If you experience a
verticalflickeringbar,usethisfunctiontomakeanadjustment.
Tracking
“Tracking”synchronizesthesignaltimingofthedisplaywiththe
graphiccard.Ifyouexperienceanunstableorflickeringimage,use
this function to correct it.
Sharpness
Adjusts the sharpness of the image.

Press the to decrease the sharpness.

Press the to increase the sharpness.

“H.Position”,“V.
Position”,“Frequency”
and “Tracking”
functions are not
supportedunderDVI
andVideomode.
Image
(Computer / Video
Mode)

“Sharpness” functions
is not supported under
DVIandComputer
mode.