Acer PD525 Series - Setting up Your WPG; Connecting to the WPG for the First Time

36
English ...
Wireless projection
Setting up your WPG
ChecktheLEDforthepowerstatus.
• RedindicatesthattheWPGisreceivingpower,butisinactive.
• Green indicates that the WPG is being used to project images.
You may also like to connect a LAN cable to the LAN (RJ-45) port on the side
of the dongle. This will allow you to connect to the Internet to retrieve inter-
active content or download rmware upgrades as they become available.
Connecting to the WPG for the
rst time
Ifthisisthersttimeyou’veconnectedtotheWPG,youwillneedto
download and install the driver from the WPG. The software is stored
ontheWPG,sothereisnoneedforaninstallationCD.Ensurethat
you have administrator-level permission on your computer so that
you can install the software.
To download the software, you must ensure that your browser
is set to open up a website. If your browser is set to open with a
blank page, you will not be able to download the software. To
check this, select Tools > Internet Options. Ensure that there is a
website in the text box.