Acer PD525 Series - Using the Audio Function

40
English ...
Wireless projection
Using the audio function
If“Wireless”isselectedastheinputsource,youcanplayaudiocontent
throughtheinternalspeakersoftheprojector.Youcanalsoplugexternal
speakers into the WPG’s audio-out jack for better audio quality.
Your audio driver may have different terminology for some of the set-
tings required below.
If you wish to use the WPG’s audio features, please ensure that none of
the audio settings is muted.
Tosetuptheaudio,youmustperformthefollowingsteps:
1) OpentheWindows®audiocontrolsbydouble-clickingonthespeaker
icon in the task tray.
2) Select Options > Properties
.
3) Select Recording in the “Adjust volume for” area.