Acer PD525 Series - Page 50

48
English ...
Appendices
Problem: The image is outstretched when displaying
16:9 DVD.
Theprojectorautomaticallydetects16:9DVDandadjuststhe
aspectratiobydigitizingtofullscreenwith4:3defaultsetting.
Iftheimageisstilloutstretched,youwillalsoneedtoadjusttheas-
pect ratio by referring to the following:

Pleaseselect4:3aspectratiotypeonyourDVDplayerifyouare
playinga16:9DVD.

Ifyoucan’tselect4:3aspectratiotypeonyourDVDplayer,please
select4:3aspectratiointheonscreenmenu.
Problem: Image is reversed.

Select “Image” from the OSD and adjust the projection direction.
Seepage24.
Problem: Lamp burns out or makes a popping sound

Whenthelampreachesitsendoflife,itwillburnoutandmay
makealoudpoppingsound.Ifthishappens,theprojectorwill
not turn on until the lamp module has been replaced. To replace
thelamp,followtheproceduresinthe“ReplacingtheLamp”.See
page46.
Problem: LED lighting message
Message
Power LED
Temp LED Lamp LED
Red Blue
Standby State
(Input power cord)
Slow Flashing
Lamp lighting
Power on
Power off (Cooling) Quick Flashing
Error(Lampfail)
Error(Thermalfail)
Error(Fanlockfail) Flashing
Error(OverTemp.)
Error
(Lamp Breakdown)
=>Light On =>Light Off