Acer PE270K - Page 32

PE270K User Guide English
22
7. DP Format: Default is DP1.2, can selection support DP1.1 or DP1.2 format.
8. Wide Mode: You can select which screen aspect you are using. The options are Full,
Aspect and 1:1.
9. PIP/PBP: Select to set PIP/PBP.
10. Hot Key Assignment: Select the function of shortcut Hot Key1 (Brightness, Volume,
Gamma, Contrast, Blue Light, Over Drive,PIP/PBP) and shortcut Hot Key2
(Brightness, Volume,Gamma, Contrast, Blue Light, Over Drive, PIP/PBP)
.
-----------------------------------------------------------------------------------------------------------
Note: Hot Key 1 and Hot Key 2 can’t repeat the same function.
11. DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note: DDC/CI, short for display data channel/command interface, which allows
monitor control to be sent via software
12. HDMI Black Level: Select to set HDMI black level
13. Quick Start Mode: Select Off or On. Turn on to speed up boot speed.
14. LED Control: Control the brightness of the Key LED.
15. USB 3.0: Default is off, You can choose on when resolution support 3840x2160-
30Hz(DP ALT Only).
16. Power-off USB Charge: Turn On or Off.
Information Page
Mode - Standard
Gaming
Picture
Color
Main Source
DP
Audio
OSD
Reset All Settings
System
H/V Frequency
H: 66KHz V: 60Hz
Mode
Free Syne
Resolution
1920x1080
Quick Start Mode
Informaon
On
Series Number
MN53035032682016TPV888
1. Press the Menu key to open the OSD.
2. Using the up/down keys, select Information Page to view the basic information for your
monitor and current input.
3. Reset All Settings: Reset the custom color settings to factory defaults.