Acer PE320QK - Advanced Color Adjustments

PE320QK User Guide English 18
• 6-axis Hue: Adjust the Red Hue, Green Hue, Blue Hue, Yellow Hue, Magenta Hue , Cyan
Hue or Reset.
Mode - Standard
Standard
Audio
Gaming
OSD
System
Picture
Color
Mode
Color Space
OffGrayscale Mode
6-axis Saturate
X
Enter
Move
6-axis Hue
Mode - Standard
Standard
Audio
Gaming
OSD
System
Picture
Color
6-axis Hue
Red Hue
X
Enter
Move
Back
50
50
50
50
50
50
Green Hue
Blue Hue
Yellow Hue
Magenta Hue
Cyan Hue
Reset
• 6-axis Saturate: Adjust the Red Saturate, Green Saturate, Blue Saturate, Yellow Saturate,
Magenta Saturate, Cyan Saturation or Reset.
Mode - Standard
Standard
Audio
Gaming
OSD
System
Picture
Color
Mode
Color Space
OffGrayscale Mode
6-axis Saturate
X
Enter
Move
6-axis Hue
Mode - Standard
Standard
Audio
Gaming
OSD
System
Picture
Color
6-axis Saturate
Red Saturate
X
Enter
Move
Back
50
50
50
50
50
50
Green Saturate
Blue Saturate
Yellow Saturate
Magenta Saturate
Cyan Saturate
Reset
Note:
Function item is gray out and parameters are xed not open to modify.
sRGB/Rec.709/HDR:
1. Users can adjustment (Brightness, Over Drive, Refresh Rate Numand Super
Sharpness).
2. If parameter to modify and been saved the Modes will not jump to User
mode.
3. 6-axis (Hue and Saturate) are gray out and can't adjustment.
4. Grayscale mode is gray out and can't adjustment.
(EBU / DCI / SMPT-C) and modes = "standard" are shared parameter values, that
can be adjusted and saved.
1. CIE 1931 positive and negative error of 0.03, ("HDR" according to current
Panel to ne-tune).
2 N/A means to follow the current parameter value (Ex. Blue Light parameter
value).