How to fix Acer Projector when no image appears onscreen?
First, ensure the projector is connected as described in the "Getting Started" section and that none of the connector pins are bent or broken. Then, check if the projector lamp has been securely installed. Also, make sure you have removed the lens cap and the projector is switched on.
What to do if my Acer PF-807 Projector image is out of focus?
First, ensure that the lens cap is removed. Then, adjust the focus ring on the projector lens. Also, make sure the projection screen is within the required distance of 4.9 to 33.3 feet (1.5 to 10.1 meters) (WXGA series) /4.9 to 32.6 feet (1.5 to 9.9 meters) (1080P series) / 4.9 to 31.7 feet (1.5 to 9.7 meters) (WUXGA series) from the projector.
Why is my Acer Projector image too small or too large?
Adjust the zoom ring on the top of the projector. You may also need to move the projector closer to or further from the screen. Another option is to press "MENU" on the remote control or on the control panel, go to "Image --> Aspect Ratio" and try different settings.
How to fix slanted sides on Acer PF-807 Projector image?
If possible, reposition the projector so that it is centered on the screen. You can also press the "Keystone / " on the control panel or on the remote control until the sides are vertical. Alternatively, press the "Keystone" on the OSD until the sides are vertical.
What to do if Acer PF-807 image is reversed?
Select "Image --> Projection" on the OSD and adjust the projection direction.
How to troubleshoot partial, scrolling, or incorrectly displayed image on Acer PF-807 with notebooks?
First, press "RESYNC" on the remote control or control panel. For an incorrectly displayed image: Follow the steps for item 2 (above) to adjust the resolution of your computer. Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]. If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.
What to do if my Acer Projector stops responding to all controls?
If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power.
Why is the screen of the notebook computer not displaying my presentation on Acer PF-807 Projector?
If you are using a Microsoft® Windows® based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. If you are using an Apple® Mac® OS based notebook: In System Preferences, open Display and select Video Mirroring "On".
Why is my Acer PF-807 image stretched when displaying a "widescreen" DVD title?
When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: * If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD. * If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player. * If you play an Letterbox (LBX) format DVD title, please change the format to Letterbox (LBX) in the projector OSD.
How to fix unstable or flickering image on Acer PF-807?
Adjust the "Tracking" to correct it. Change the display color depth settings on your computer.
To Next Page
General
