95 Chapter 7
Step 5:Click "Next" at create a RAID volume window.
Step 6:Key the name in "Volume Name" and select "RAID 0" in RAID Level.
Step 7:At least select two HDDs as "Volume Location".
Picture17
Step 8:Specify Volume Size then press "next".
Picture18
Step 9:Press "next" to finish setup and start create RAID 0.
Step 10:It may takes half and hours to create RAID 0.After create completely,it will ask to reboot to finish
create RAID 0.
To Next Page
Loading...
