board
nt
Cannot initialize the keyboard. Make sure the keyboard is attached correctly and no
keys are pressed
during POST. To purposely configure the system without
set the error halt condition in Setup to HALT ON ALL, BU
BIOS then ignores the missing keyboard during POST.
This message usually indicates that one or more keys have been pressed during the
keyb
oard tests. Be sure no objects are resting on the keyboard.
This message displays during a full memory test, counting down the memory
are
as being tested.
If POST detects an error during memory testing, additional information appears giving
sp
ecifics about the type and location of the memory error.
ults loaded
If the system cannot boot using the current CMOS configuration, the BIOS can
o
verride the current configuration with a set of BIOS defaults designed for the
table, minimal-performance system operations.
ST screen
System OEMs may replace the Phoenix Technologies Award BIOS POST display
w
ith their own proprietary display. Including this message in the OEM display
ermits the operator to switch between the OEM display and the default POST
play.
isk fail
POST detects an error in the primary master IDE
hard drive.
isk fail
POST detects an error in the secondary master IDE
hard drive.
POST detects an error in the primary slave IDE hard drive.
POST detects an error in the secondary slave IDE
hard drive.