Acer Predator PO3-600 E - Jumper Settings

80
Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled.
Jumper Settings
Jumper
Type
Description
Setting (Default)
Illustration
CLEAR_CMOS
3
-
pin
Clear CMOS
1-2: NORMAL.
2
-3: CLEAR.
Before clearing the CMOS, make sure
to turn off the system.
1
CLEAR_CMOS
To avoid the system instability after clearing CMOS, we recommend users
to enter the main BIOS setting page to “Load Default Settings” and then
“Save and Exit Setup”.