Acer S1383WHne - Image Size and Orientation Fixes

36
English
9 Image is too small
or too large
• Adjust the zoom lever on the top of the projector.
• Move the projector closer to or further from the
screen.
• Press "MENU" on the remote control. Go to "Image -
-> Aspect Ratio" and try different settings or press
"RATIO" on the remote control to adjust directly.
10 Image has slanted
sides
• If possible, reposition the projector so that it is
centered on the screen.
• Press the "Keystone / " button on the remote
control until the sides are vertical.
• Press "MENU" on the remote control to open the
OSD menu. Go to "Image"->"Keystone" to make
adjustments.
11 Image is reversed
• Select "Image --> Projection" on the OSD and adjust
the projection direction.