What to do if Acer V226HQL Monitor displays 'Overclock-Go to Standby'?
If your Acer Monitor displays 'Overclock-Go to Standby', it indicates that your computer is set to an inappropriate monitor mode. Restart your computer.
Why is Acer V226HQL unable to achieve plug-and-play?
If your Acer Monitor is unable to achieve plug-and-play, check whether your PC is matched with Plug & Play. Also, check whether the pin of the VGA signal cable connector is bent.
General| Style | Flat |
|---|---|
| Color | Black |
| Screen Type | - |
| Stand Type | Simple |
| Wall Mount | VESA 100 x 100 mm |
| Tilt | -5° to 25° |
| Sound | - |
| Features | Picture-In-Picture |
| OS Compatibility | Mac |
| Interface Connectors | RF In |
| Operation Conditions | humidity 10% to 80% (non-condensing) |
| Tiltable | yes |
| Touch Screen | no |
| Screen Size | 54.6 cm (21.5"") |
| Panel Type | TN LCD |
| Aspect Ratio | 16:9 |
| Resolution | 1920 x 1080 |
| Refresh Rate | 60 Hz |
| Viewing Angle | - |
| Response Time | 5 ms |
| Brightness | 450 cd/m² |
| Contrast Ratio | 3000:1 |
| Pixel Pitch | - |
| Type | - |
| Power Supply | 100-240V |
| Power Consumption | 26 W (typ) |
| Depth with Stand | 8.1 in |
| Height with Stand | 15.4 in |
| Width with Stand | 20.0 in |
| Net Weight with Stand | 8.07 lb |
| Depth without Stand | 2.0 in |
| Height without Stand | 12.0 in |
| Width without Stand | 20.0 in |
| Net Weight without Stand | 7.14 lb |
| Built-In Speakers | no |
Read these instructions carefully and keep for future reference.
How to adjust brightness, contrast, black boost, low blue light, and sharpness.
To Next Page
