What to do if my Acer V227Q Monitor has no picture?
If your Acer monitor isn't displaying a picture, try these steps: First, use the OSD menu to maximize the brightness and contrast settings, or restore them to their default levels. Check that the power switch is turned on. Ensure the AC power cord and video signal cable are securely connected to the monitor and that your computer is powered on.
Why does my Acer V227Q Monitor have an abnormal picture?
An abnormal picture on your Acer monitor might be due to a mismatch between the graphics adapter and monitor specifications, causing an input signal frequency issue. To resolve this, use the OSD to adjust the RESOLUTION, CLOCK, CLOCK-PHASE, H-POSITION, and V-POSITION settings, especially with non-standard signals. If the full-screen image is missing, try selecting a different resolution or vertical refresh timing. After adjusting the image size, wait a few seconds before changing or disconnecting the signal cable or powering off the monitor.
Why is my Acer V227Q Monitor picture unstable?
An unstable picture on your Acer Monitor might be due to a mismatch between the graphics adapter and monitor specifications, causing an input signal frequency mismatch. Check that the specification of graphics adapter and monitor is in compliance.
What to do if display is missing, shifted, or wrong size on Acer V227Q Monitor?
If the display on your Acer Monitor is missing, center shifted, or the display size is too small or too large, use the OSD to adjust the RESOLUTION, CLOCK, CLOCK-PHASE, H-POSITION, and V-POSITION settings, especially when using non-standard signals. Also, if the full-screen image is missing, select another resolution or vertical refresh timing using the OSD. After adjusting the image size, wait a few seconds before changing or disconnecting the signal cable or powering off the monitor.
How to fix abnormal sound on Acer V227Q Monitor?
If you're experiencing abnormal sound on your Acer monitor (audio-input model only), first check that the audio cable is properly connected to the host PC. Also, verify that the volume level on the host PC isn't set to the minimum; if it is, try increasing the volume.
General| Screen Size | 21.5 inches |
|---|---|
| Resolution | 1920 x 1080 (Full HD) |
| Panel Type | IPS |
| Refresh Rate | 75 Hz |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Viewing Angles | 178° (H) / 178° (V) |
| Color Support | 16.7 million colors |
| VESA Mount | 100 x 100 mm |
| Response Time | 4 ms |
| Ports | HDMI, VGA |
To Next Page
