EN-14
8. Black Boost: This boosts the amplitude of the dark color levels of the
display– blacks will be less black. The higher the level, the higher the
boost.
9. ACM: Turn ACM on or off. The default is off.
10. H. Position: Adjust the horizontal position from 0 to 100.
11. V. Position: Adjust the vertical position from 0 to 100.
12. Focus: Adjust the focus from 0 to 100.
13. Clock: Adjust the clock from 0 to 100.
Adjusting the Color
1. Press the MENU key to open the OSD.
2. Using the
/ keys, select Color from the OSD. Then navigate to the
picture element you wish to adjust.
3. Use the / keys to select setting.
To Next Page
Loading...
