Why my Acer Monitor has no picture?
If your Acer Monitor shows no picture, ensure that the AC power cord is properly connected to the monitor. A loose connection can prevent the monitor from displaying an image.
How to troubleshoot abnormal sound on Acer Monitor (audio-input model)?
If you are experiencing abnormal sound issues with your Acer Monitor (only audio-input models), first, check that the audio cable is securely connected to the host PC. A loose connection can cause sound problems.
Why does my Acer Monitor show no picture even when plugged in?
If your Acer Monitor displays no picture, ensure that the computer system is turned on. A simple check to confirm the computer is powered can resolve the issue.
Why is there no sound from my Acer V277 Monitor (audio-input model)?
If you are experiencing abnormal sound issues with your Acer Monitor (audio-input model), check that the volume setting on the host PC is not set to the minimum. Try increasing the volume level to see if the sound improves.
Why does my Acer V277 have an abnormal picture?
An abnormal picture on your Acer monitor might be due to a mismatch between the graphics adapter and monitor specifications, causing an input signal frequency mismatch. To resolve this, check the compatibility of your graphics adapter and monitor specifications. For non-standard signals, use the OSD to adjust the RESOLUTION, CLOCK, CLOCK-PHASE, H-POSITION, and V-POSITION. If the full-screen image is missing, use the OSD to select another resolution or vertical refresh timing. After adjusting the image size, wait a few seconds before changing or disconnecting the signal cable or powering off the monitor.
Why is my Acer V277 Monitor picture unstable?
If your Acer Monitor displays an unstable picture, it might be due to a mismatch between the graphics adapter and monitor specifications, causing an input signal frequency issue. Ensure that the specifications of graphics adapter and monitor are in compliance.
How to adjust the display size on my Acer Monitor if it's missing or shifted?
If the image on your Acer Monitor is missing, shifted from the center, or appears too small or too large, use the On-Screen Display (OSD) to adjust the RESOLUTION, CLOCK, CLOCK-PHASE, H-POSITION, and V-POSITION settings. This is particularly useful for non-standard signals.
How to fix abnormal sound on my Acer V277 Monitor?
If you're experiencing abnormal sound on your Acer monitor (audio-input model), first check that the audio cable connecting the monitor to the host PC is properly connected. Also, verify that the volume setting on the host PC is not set to the minimum. If it is, try increasing the volume level.
How to fix Acer Monitor when there is no picture but the LED is ON?
If your Acer Monitor displays no picture and the LED is on, use the On-Screen Display (OSD) to adjust the brightness and contrast to the maximum settings, or reset them to their default values. This may resolve the issue.
What to do if my Acer V277 Monitor has no picture and the LED is OFF?
If your Acer Monitor shows no picture and the LED is off, the first step is to check the power switch to ensure it is turned on. This is a common cause of this problem.
General| 3D | No |
|---|---|
| Screen shape | Flat |
| Display surface | - |
| Display diagonal | 27 \ |
| Display technology | LED |
| Native aspect ratio | 16:9 |
| Vertical scan range | 55 - 75 Hz |
| Maximum refresh rate | 75 Hz |
| Contrast ratio (dynamic) | 100000000:1 |
| Contrast ratio (typical) | 1000:1 |
| Display number of colors | 16.78 million colors |
| Display brightness (typical) | 250 cd/m² |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| RMS rated power | 4 W |
| Number of speakers | 2 |
| Certification | TCO |
| Product color | Black |
| Market positioning | Business |
| Tilt angle range | -5 - 25 ° |
| Panel mounting interface | 100 x 100 mm |
| AC input voltage | 120 V |
| Energy efficiency scale | A to G |
| Power consumption (max) | 17 W |
| Power consumption (off) | 0.3 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 26.1 W |
| Power consumption (PowerSave) | 16.17 W |
| Sustainability certificates | ENERGY STAR |
| Cables included | AC, DisplayPort, VGA |
Weight and Dimensions| Depth (with stand) | 207 mm |
|---|---|
| Height (with stand) | 464 mm |
| Weight (with stand) | 8880 g |
| Depth (without stand) | 66 mm |
| Width (without stand) | 614 mm |
| Height (without stand) | 367 mm |
| Weight (without stand) | 5000 g |
To Next Page
