Acer XF250Q - Base and Screen Adjustment; Attaching the Base; Screen Position Adjustment

English
2
Attaching the Base
Install: Align the base with the stand and push the base towards the top of the monitor, and
then rotate the base clockwise. Tighten the screw clock-wise.
Remove: Reverse the steps to remove the base.
Screen position adjustment
In oder to optimize the best viewing position, you can adjust the height/tilt/swivel/pivot of the
monitor.
• Height Adjustment
After pressing the top of the monitor then you can adjust the height of the monitor.
1
2
150
mm
• Tilt
Please see the illustration below for an example of the tilt range.
Only at the highest point can 35 degrees of recline be offered for the angle of elevation.
5
o
35
o