Acer XF250Q - Product Information

English
15
1. The Setting menu can be used to select the input and other important settings.
2. Press the MENU key to open the OSD.
3. Using the ▲/▼ keys, select Setting from the OSD. Then navigate to the setting you
wish to adjust.
4. Use the ◄/► keys to select the setting.
5. Input: Select the source from DVI, HDMIor DP.
6. Auto Source: Default is "on", support auto source.
7. DP Format :Default is DP1.2, can selection DP support DP1.1 or DP1.2 format.
8. PIP/PBP settings.
9. HDMI Black level setting.
10. Wide mode: You can select which screen aspect you are using. The options are Aspect
and Full.
11. DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls
to be sent via software.
12. Quick start mode setting.
Product information
Mode - User
Gaming
Picture
Color
Main Source
DVI_D
Audio
OSD
Reset All Sengs
System
H/V Frequency
H: 67KHz V: 60Hz
Mode
Normal
Resolution
1920x1080
Quick Start Mode
Informaon
Series Number
MML 3451 80060290001 4212
Save Sengs to...
1. Press the MENU key to open the OSD.
2. Using the ▲/▼ keys, select Information to view the basic information for your monitor
and current input.
3. Reset all settings: Reset the custom color settings to factory defaults.