ACER_LCD_XF273 S_SM20211215
- 7 -
1.3.3 User Controls and Indicators:
1.3.3.1 Power On/Off Switch:
The monitor shall have a power control switch visible and accessible on the front of monitor.
1.3.3.2 Power Indicator LED:
The monitor shall have LED indicators located on the front of the monitor. Table below is the LED
color for the power indicator
1.3.3.3 On-Screen Display (Please refer to user guide for more information of OSD function):
On Screen Display system shall be used to control the monitor. Current setting will be saved and OSD
will be tuned off when the keys are not touched for a period of time.
1.4 Flat Panel:
1.4.1 General Requirements:
BOEB270WU3
is a 27’’ TFT Liquid Crystal Display module with WLED Backlight unit
and 2 channel LVDS interface. This module supports 1920(H)x1080(V) FHD mode and can display up
to 16.7M colors(8 bits ).
1.4.2 Panel Timings:
The controller in the monitor shall translate video timings from the PC to meet the timing
requirements listed in Panel specification. Under no circumstances may the controller supply the panel
with timings that may result in damage. The controller shall insulate the panel from the PC, so that the
panel shall always be driven according to its specification regardless of the timings being sent from the
PC.
1.4.3 Polarizer Hardness:
The outer face of the front polarizer panel shall be covered with a coating with a 3H hardness value.
To Next Page
Loading...
