English
Selecting the input
Open the Input control and select HDMI1, HDMI2, DP, TypeC or Auto Source.
When you are done, press the to exit current page and store.
Main menu
1. Press the MENU key to open the OSD.
2. Toggle the button
to the up or down
to select Picture from the OSD. The
toggle to the right to navigate to the element you wish to adjust and press the joystick
to enter it.
3. Toggle the joystick
to the left
or right to adjust the sliding scales.
Information Hot Key
: Show Monitor Information and Reset control function.
Modes Hot Key : To change Modes Hot Key menu.
Exit Hot Key
X
: To exit current page and store.
Picture
1. Press the MENU key to open the OSD.
2. Toggle the button to the up or down to select Picture from the OSD.Then toggle to the
right to
navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. The Picture menu can be used to adjust the Brightness, Contrast, Black Boost, Low
Blue Light, ACM,Super Sharpness.
5. Brightness: Adjust the brightness from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note: Adjusts the balance between light and dark shades.
Input
HDMI 1
Auto Source
On
Input
Mode - User
80
S
Off
Off
Off
Off
50
Brightness
Contrast
Blue Light
ACM
HDR
Super Sharpness
Picture
9
Black Boost
Color
OSD
System
Save Settings o...
Audio
Gaming
Max Brightness
To Next Page
Loading...
