achilles A23S - Page 32

23
2. Pull the lock lever all the way back. (lock
position).
3. Insert the key into the starter switch
and turn it to the "RUN" position, and the
glow lamp indicator will light up while
the engine is preheated, and will go out
automatically after preheating is
finished.
(1) Starter Switch (A) “STOP”
(B) “RUN”
(C) “START”
4. Turn the key to “START” position and
release after the engine has started; it
will automatically return to the “RUN”
position.
5. Check if all warning lamps have gone
out. Should a warning lamp still be lit up,
stop the engine then remove the key and
check for the cause.
.