ACLAS PP7X - 3 Setting the Printer; Using the Printer; Connecting the Computer

10
3 SETTING THE PRINTER
3.1 Using the Printer
3.2 Connecting the Computer
(1) Power off the printer.
(2) Plug the communication cable securely into the printer, then attach the other end of the cable to the computer.
(3) If the cable connector is shown as picture 11, tighten the two screws on both sides of the cable connector after
connecting.
Power indicator light
To prompt error
To prompt the paper is run out
Press the button once to advance paper once line. You can
also hold down the Feed button to feed paper continuously.
Picture 11