ACME SUPERNOVA - Page 40

- 39 -
Zoom
Focus
Blade
Blade DW1
Blade DW 2
Blade UP 1
Select Blade UP 1, press ENTER.
Use UP/DOWN button to select a value between -128 and 127, confirm
your selection with ENTER.
To exit the offset menu, press MENU, or wait 30 seconds.
Select Blade DW 2, press ENTER.
Use UP/DOWN button to select a value between -128 and 127, confirm
your selection with ENTER.
To exit the offset menu, press MENU, or wait 30 seconds.
Select Blade DW 1, press ENTER.
Use UP/DOWN button to select a value between -128 and 127, confirm
your selection with ENTER.
To exit the offset menu, press MENU, or wait 30 seconds.
Select Blade, press ENTER.
Use UP/DOWN button to select a value between -128 and 127, confirm
your selection with ENTER.
To exit the offset menu, press MENU, or wait 30 seconds.
Select Focus, press ENTER.
Use UP/DOWN button to select a value between -128 and 127, confirm
your selection with ENTER.
To exit the offset menu, press MENU, or wait 30 seconds.
Select Zoom, press ENTER.
Use UP/DOWN button to select a value between -128 and 127, confirm
your selection with ENTER.
To exit the offset menu, press MENU, or wait 30 seconds.