ACME SUPERNOVA - Page 41

- 40 -
Blade UP 2
Blade LF 1
Blade LF 2
Blade RG 1
Blade RG 2
Select Blade RG 2, press ENTER.
Use UP/DOWN button to select a value between -128 and 127, confirm
your selection with ENTER.
To exit the offset menu, press MENU, or wait 30 seconds.
Select Blade RG 1, press ENTER.
Use UP/DOWN button to select a value between -128 and 127, confirm
your selection with ENTER.
To exit the offset menu, press MENU, or wait 30 seconds.
Select Blade LF 2, press ENTER.
Use UP/DOWN button to select a value between -128 and 127, confirm
your selection with ENTER.
To exit the offset menu, press MENU, or wait 30 seconds.
Select Blade LF 1, press ENTER.
Use UP/DOWN button to select a value between -128 and 127, confirm
your selection with ENTER.
To exit the offset menu, press MENU, or wait 30 seconds.
Select Blade UP 2, press ENTER.
Use UP/DOWN button to select a value between -128 and 127, confirm
your selection with ENTER.
To exit the offset menu, press MENU, or wait 30 seconds.