ACME VR302 - Video;Photo Playback

9
VIDEO MODE
Be sure that the camera is in a video mode.
To start recording:
Press the shutter/select button
. The camera will
emit a single beep sound and will start recording. The
blue status light will be blinking during the recording.
To stop recording:
Press the shutter/select button
. The camera will
emit a single beep sound and will stop recording.
PHOTO MODE
Be sure that the camera is in a photo mode.
To take a photo:
Press the shutter/select button
. The camera will
emit a camera shutter sound.
BURST MODE
To capture a series of photos, verify that the camera is
in a burst mode. In the burst mode your camera takes 3
photos in 1 second, 7 photos in 2 seconds, 15 photos in
4 seconds and 24 photos in 8 seconds.
To take a burst series:
Press the shutter/select button
. The camera will
emit a camera shutter sound.
TL (TIME LAPSE) VIDEO
Be sure that the camera is in a TL video mode. In this mode your
camera captures a series of photos following second intervals:
0.5, 1, 2, 3, 4, 5, 10, 15, 20, 30, and 60. Captured photos will be
automatically combined into a single time lapse video le.
To record a TL video:
Press the shutter/select button
. The camera will emit a
single beep sound and will start recording.
To stop recording:
Press the shutter/select button
. The camera will emit a
single beep sound and will stop recording.
TL (TIME LAPSE) PHOTO
Be sure that the camera is in a TL photo mode.
In this mode your camera captures a series of photos following
second intervals: 3, 5, 10, 30, and 60.
Captured photos can be combined into a video le later by
using a computer and various video editing software.
To capture a TL photo series:
Press the shutter/select button
. The camera will initiate a
countdown timer and emit a camera shutter sound each time
after a photo is taken.
Make sure that “TL Photo” is turned on in the advanced settings
menu of this mode, otherwise only a single photo will be
captured after a set time interval.
VIDEO/PHOTO PLAYBACK
1. Access the other modes window by pressing the power/mode button
.
2. Select video
or photo mode playback by tapping the required
icon.
3. Press the shutter/select button
or on-screen icons / II to play/pause
the video.
4. Swipe left or right to see other videos or photos.
5. Press the Wi-Fi button
or on-screen icon to exit the playback
mode.
i
Time lapse photography is a technique of lming very slow actions
by taking a series of single pictures over a period of time and then
putting them together to show the action happening very quickly.
SETTINGS MENU
Enter the settings menu, use swipe up/down actions to scroll through
various menu items and tap the name of the required settings item.
The following menu items are available in the settings menu:
Video resolution – change the resolution of video capturing.
Photo resolution – shows default photo resolution. It can be adjusted on
some camera models.
Video interval – change the duration of video les for storage into the
micro-SD card: 1 or 5 minutes.*
*Multiple les are written to your memory card so that small segments of
video content can be overwritten during loop recording. When viewing this
content on a computer, you will see separate les for each time segment.