6.21
FEET LOCK FUNCTION
In some cases, the machine that is displayed
as the movable machine is not movable, or
maybe some of the feet are not adjustable. In
order to perform proper alignment in these
cases, the Feet Lock function can be used.
This function allows you to select which feet
are locked and which feet are adjustable.
Feet Lock is available both in shimming and
alignment.
Enter dimensions. The required distances are
those between the first and second pairs of
feet on the stationary machine and between
the first pair of feet on the stationary machine
and the first pair of feet on the movable
machine.
Select the two pairs of feet you want to lock.
To Next Page
Loading...