15.3
OPERATING MODES
M3 and S3 units has two operating modes:
On and Off.
Turn the units on and off by pressing the
ON/OFF button firmly.
In case the units fail to respond, it is possible
to turn it off by pressing down the ON button
for more than 10 seconds.
CONNECTIONS
Bluetooth connection
The main connection for M3 and S3 units is
the built in Bluetooth connection. The units
will automatically connect to the display unit
when turned on if they are paired. See
chapter “Global settings” for instructions on
how to pair measurement units to the display
unit.
To avoid accidental Bluetooth transmission in
a restricted area the Bluetooth function can be
completely disabled – contact your local sales
representative for more information.
If the Bluetooth has been disabled (as
indicated by the fact that the Bluetooth LED is
not flashing or continuously blue when the
unit is turned on) it can be enabled by
pressing the battery status button quickly 5
times in a row.
To Next Page
Loading...