14
Fig.3-2 Menu Structure (see also S.10)
N O T E
We recommend that before powering up the amplier for the rst time, you
familiarize yourself with the functions of the RCU in the OFF menu. The
available controls and indications seen on the RCU are similar in both the
OFF and MAIN menus.
You can proceed in one of two directions:
a) you can enter the OFF menu (see below) or:
b) you can turn on the amplier and begin the warm-up sequence. After 2.5 minutes you will
enter the MAIN menu (see S.4-1) and may start operating the amplier.
The OFF-menu (see also section 6) can be reached by pressing the SET/EXIT button:
To Next Page
Loading...
Need help?
General
