Need help?Do you have a question about the Acom 1010 and is the answer not in the manual?
General| Complies with CE safety and electromagnetic compatibility requirements, as well as FCC regulations | Yes |
|---|---|
| Power Output | 1000 W PEP |
| Modes | SSB, CW, RTTY, AM, FM |
| Power Supply | 200-240VAC or 100-120VAC, 50-60Hz, single phase. |
| Cooling | Forced air |
| Harmonic Output | -50 dB |
| Input Impedance | 50 Ohms |
| Output Impedance | 50 Ohms |
| Tube | 4CX800A |
Explains the ACOM 1010 amplifier's capabilities and features.
Provides contact information for support and assistance.
Lists items included with the ACOM 1010 amplifier.
Details the key functionalities and benefits of the amplifier.
Outlines safety precautions and defines hazard signal words.
Guide on how to unpack and check the amplifier for damage.
Instructions for setting the correct mains voltage for the amplifier.
Recommendations for placing the amplifier for optimal operation and safety.
Details on connecting the amplifier to the station and power supply.
Overview of the amplifier's front panel controls and LED indicators.
Step-by-step guide for powering the amplifier on and off.
How to switch between OPERATE and STANDBY modes.
Explanation of the RTTY mode for continuous duty operations.
Instructions for selecting between ANT1 and ANT2 outputs.
Detailed procedure for tuning the amplifier for optimal performance.
Information on the amplifier's automatic protection mechanisms.
Guidelines for regular checks and upkeep of the amplifier.
Instructions on how to safely clean the amplifier's exterior.
Procedure for replacing main and internal fuses.
Information and warnings regarding tube replacement.
Presents a simplified electrical schematic of the amplifier.
Details on accessing and using service and diagnostic functions.
Lists technical specifications like frequency coverage, power output, and impedance.
Describes the various functions and features of the amplifier.
Information on proper storage, packing, and shipping guidelines.
Guidance on environmentally responsible disposal of the product.
To Next Page
