Acorn 80 - Page 103

103
ACORN 80 Maintenance & Service Manual
APPENDIX 10
Rationalisation Procedures
4 Test the operation of the seat swivel switch by:
 • Assemblingaseatbase
 • Powerupthelift
 • Putacallinandthefollowingshouldbevisibleonthedisplay
5 Rotate the seat base and the following should be seen on the display whilst the call is activated.
6 If this does not happen then loosen and adjust the plastic cover until the position of the switch is correct.
IF IN DOUBT, PLEASE ASK FOR ASSISTANCE