7
T700 - CONTROLLER INFORMATION
POWERED FOOTREST OPTION
The T700 has the powered footrest operating circuit
integrated. No extra PCBs are required in the carriage
when using this option.
Powered Footrest Operation:
At the top or bottom of the stairs, after the stairlift comes
to a stop, use the buttons located along both sides of the
seat to lower or raise the footrest as required.
AUTO HINGE OPTION
When the Auto Hinge setting has been
selected in the T700 system, it will
require the addition of a limit ramp to
activate the operation of the hinge .
The T700 Hinge Controller features:
• RF Technology, no umbilical cable require
• Arm rest toggle and remote control operation
• No call stations required
• Battery backup power supply, allowing operation
of the hinge in the event of a power cut
• Coded communication protocol, reducing interference
• Manual hinge activation (for engineer or
emergency use only)
• External LED power ON display
• Universal Input, which enables you to connect AC
power leads from dierent countries.
To Next Page
Loading...
Need help?
General