Need help?Do you have a question about the Acorn T700 and is the answer not in the manual?
General| Brand | Acorn |
|---|---|
| Model | T700 |
| Category | Controller |
| Language | English |
Details required items for converting to a T700 controller.
Features universal AC input and replaces older transformers.
Describes the system for recharging batteries.
Explains behavior and display codes during low battery.
Details automatic energy-saving mode after inactivity or power cut.
Explains how the remote control works, focusing on IR.
Mentions the feature of 3 volume settings.
Notes the unified fault code system for diagnosis.
Describes the integrated powered swivel circuit and operation.
Details the integrated powered footrest circuit and operation.
Explains requirements and features of the Auto Hinge system.
Describes the manual hinge assist for parking.
Steps to enter the setting mode for configuration.
Procedure to set the direction of the powered swivel.
Procedure to select IR or RF remote control.
Procedure to configure auto hinge or manual hinge.
Method to save the configured settings.
Instructions for wiring the hinge control box.
Steps to pair the hinge control box with the PCB.
How to adjust the volume of the beep alerts.
Process for pairing a new remote control.
Steps to remove paired remotes and hinge address.
How to access system information like battery and software versions.
Wiring diagram for the standard PCB configuration.
Wiring diagram for PCB with powered options.
Diagram detailing PCB connector pinouts.
Wiring diagram for the powered swivel seat.
Wiring diagram for the PCB and rail connections.
Diagram showing the connection between the hinge rail and control box.
Detailed wiring diagram of the hinge control box.
Fault codes related to normal lift operation.
Fault codes specific to charging operations.
Codes indicating errors during operation.
Critical error codes requiring immediate attention.
Continuation of critical error codes.
Codes related to hardware malfunctions.
To Next Page