Hinge Operation
• Using the directional switch on the arm
When the lift reaches the hinge activation ramp, the
stairlift will stop and the auto hinge will be
automatically raised or lowered. This will
allow the user to operate the hinge safely.
• Upward movement using the remote control
When the lift reaches the activation ramp, the stairlift
will park and the auto hinge will be automatically
raised. Release and press the remote again if a
journey to the top is required.
• Downward movement using the remote control
When the lift reaches the activation ramp, the stairlift
will park. Release and press the remote again if a
journey to the bottom is required.
T700 - CONTROLLER INFORMATION
8
MANUAL HINGE OPTION
AUTO PARKING FUNCTION
When a manual hinge is used with the T700 system, it will
require the addition of a limit ramp to assist parking the lift.
Operation:
• Using the remote control
When the lift reaches the activation ramp, the
stairlift will park. Release and press the remote
control again if a journey to the top or the bottom
is required.
• Using the directional switch on the arm
The lift will drive thought the hinge ramp
without stopping.
To Next Page
Loading...
Need help?
General