Acrel APM Series - 2.9 DO Settings

2.9 DO Settings
Associated alarm configuration format of do settings is as follows:
Address
Address 1
Address 2
Content
H16
L16
INT32
B31
B30
B29
…
B
2
B1
B0
Associated with the alarm
number 31 of the first group
(Alarm of over active power)
...and so on
Associated with the
alarm number 0 of the
first group (phase A
overcurrent alarm) (1:
valid; 0: invalid)
Address
Address 3
Address 4
Content
H16
L16
INT32
B31
B14
B13
…
B
2
B1
B0
Associated with the alarm
number 63 of the first group
(DI2 alarm)
...and so on
Associated with the
alarm number 32 of
the first group (Alarm
of over reactive power)
Address
Address 5
Address 6
Content
H16
L16
INT32
B3
1
....
B6
B5
B4
B3
B2
B1
B0
...
Associated first
group alarm No.
69(Fourth channel
temperature alarm)
Associated with the
alarm number 64 of
the first group (DI3
alarm)
Address
Address 7
Address 8
Content
H16
L16
INT32
B31
B
30
B29
…
B2
B1
B0
Associated with the alarm number 31 of the
second group (Alarm of over active power)
...and so
on
Associated with
the alarm
number 0 of the
second group
(phase A
overcurrent
alarm)
Address
Address 9
Address 10
Content
H16
L16
INT32