Acrel APM Series - Page 76

B31
B
14
B13
…
B2
B1
B0
Associated with the alarm number 63 of the
second group (DI2 alarm)
...and so
on
Associated with
the alarm
number 31 of
the second
group (Alarm of
over reactive
power)
Address
Address 11
Address 12
Content
H16
L16
INT32
B31
…
B6
B1
B4
B3
B2
B1
B0
…
Associated second
group alarm No.
69(Fourth channel
temperature alarm)
Associated with the
alarm number 64 of
the second group (DI3
alarm)
Take reading the associated alarm settings of DO1 (2590-2601) as an example, the read-out value is 0x0000 0x0007 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Address
2590
2591
Content
H16
L16
INT32
B31
B30
B29
…
B2
B1
B0
0
0
0
0
1
1
1
Associated with the alarm number
31 of the first group (Alarm of
over active power)
...and so
on
Associated with
the alarm
number 0 of the
first group
(phase A
overcurrent
alarm)
The remaining addresses in this example are all 0 and are no longer listed.
If the current DO1 function is controlled by the alarm of the first group, in this example, DO1 is associated with the phase A
overcurrent alarm, the phase B overcurrent alarm, and the phase C overcurrent alarm of the first group.